| Product Introduction

the wet dust collector series is characterized by wet filtration, large air volume, high pressure and integrated structure. Compared with other filter dust collectors, it is more professional for special smoke treatment. It is specially used for high temperature, oily, viscous, peculiar smell or flammable and explosive smoke, which avoids the problem of filter blockage of dry filtration and the problem of low filtration precision of wet filtration. Moreover, the whole machine includes the integrated structure of filtration system and fan system, which covers a small area, is convenient to move and has high cost performance.

| Advantages and Features

wet dust collector the working principle of the series is that the dust collector relies on the high-speed flue gas from the nozzle (diffuser) to impact in the water to arouse a large amount of foam and water droplets to form a strong spray. The flue gas then turns 180 ° to change its flow direction. Due to inertia, most of the soot particles settle in the water. Another part of fine dust is further purified by the action of foam and water droplets forming water spray, and the purified air flow is separated by demisting plate. The flue gas is discharged through the fine steel wire, and the treated flue gas becomes low humidity gas and enters the lower-level dry filtration system, which is discharged after reaching the standard. The filtration system adopts wet filtration, wet filtration adopts water filtration with operating cost, and special exhaust gas dust can be added with specific agents (such as acid neutralization, alkali neutralization, and specific deodorant, etc.). When the flue gas passes through the lower water tank, the molecules and particle pollutants therein collide with the mist droplets, resulting in the merger of droplets. Due to the large surface viscosity of oil molecules and particle pollutants, they will be melted by the mist droplets, increasing in volume and causing sedimentation, causing the particle molecules to be trapped by water, and micron-sized flue gas enters the lower treatment area. Because a small amount of water mist brought out by the negative pressure has a greater impact on the next treatment process, the treatment of water mist is also critical. The water filtration adopts the combination of the first traditional packing ball wet mist purification and the improved corrosion-resistant gas-liquid separation demisting section in China. Wet filter set at the bottom of the sewage outlet, set up to increase the water inlet, large caster design, easy to move. Wet dust collector series drive unit adopts volute installation motor and fan blade composition, the use of vertical motor structure, integrated compact design, in the case of ensuring negative air volume, reduce the machine floor space. The electronic control of the equipment increases the frequency conversion of Huichuan to achieve the effect of energy saving and safe use of electricity. Customers can adjust according to the use of the environment on site. The operating frequency of the equipment is equipped with a display screen. The user can start the equipment through the touch function keys on the touch screen, and can monitor the operating status of the equipment in real time, view fault information, etc. The equipment is also equipped with a wind speed sensor and a pressure sensor to facilitate real-time monitoring of the equipment The wind speed at the air inlet and the pressure during equipment operation. Equipped with a filter water tank can achieve a good filtering effect by mixing and settling dust and water.